ENCHANTED FOREST GEL POLISH

• Content: 15 ml
• Catalysis under LED, UV, UV/LED lamp (60-90 seconds)
• Fluid viscosity
• Does not flake
• Lasts for 3 to 4 weeks
• As solid as a gel
• Easy application like a classic varnish

1. Start by applying a Primer
2. Apply a thin layer of Base Coat (Matte, Glossy, Peel Off, Chrome, etc.)
3. Cure under a UV-LED lamp
4. Then apply the first coat of semi-permanent varnish and cure again.
5. If necessary, add a second coat to intensify the desired result.
6. Finish with a suitable Top Coat and cure
7. If you used the Top Coat finish, degrease the nails with Cleaner (except Soark Off )

1. Lightly file your nails with a medium-grit file to facilitate the action of the Soak Off.
2. Use our Remover sachets, clips or dip your fingers in our remover tray
3. Repeat for each nail
4. Leave on for 15 minutes, then remove
5. Remove any remaining semi-permanent polish using our scraper or a wooden manicure stick
6. For any leftovers, use a fine-grain file, then wash your hands with soap and water.

We would like to inform you that the photos and videos on our site are published in order to show you the nuances of the colors as close as possible to reality. However, these may vary depending on the medium on which you view them (computer, tablet, mobile, etc.). This is explained by the color and brightness settings specific to each device. Consequently, it is possible that some colors appear slightly different in real life compared to what you see on the screen.

• All our semi-permanent varnishes have been tested under our UV-LED lamps, guaranteeing optimal catalysis with our devices.
• May cause allergic reactions, be sure to do a test beforehand.
• Keep out of reach of children to avoid any incident.
• In case of contact with eyes, rinse immediately with plenty of clean water, then consult a doctor if necessary.
• Strictly reserved for professional use.
• Do not apply to irritated or damaged skin.
• Close the bottles tightly after use to preserve the quality of the product.